TECHNICAL RESOURCES & GUIDANCE
Application Guides, Coverage Charts & TDS Requests
Technical best practices, substrate preparation steps, coverage estimation tables, and direct engineering datasheets for site supervisors, contractors, and architects.
Substrate Moisture & Curing Guidelines
New concrete plaster must cure for minimum 28 days with moisture content below 10% and surface pH between 7–9 before application of primer coats.
Theoretical Emulsion & Primer Coverage
Interior emulsions generally yield 120–140 sq.ft/L in 2 coats over properly sealed plaster. Porous exterior surfaces require alkali-resistant priming first.
IS 15477 Thin-Bed Tiling Specifications
Selection criteria for Type 1 ceramic adhesive vs Type 2 vitrified polymer-modified formulations based on tile weight, water absorption, and substrate vibration.
PPCPL Starcoat Fire Barrier Deployment
Dry film thickness (DFT) requirements for intumescent coatings on structural columns and vermiculite cable tray protection under IS / national building codes.
Parapet & Terrace Crack Bridging Protocol
Multi-coat elastomeric membrane application procedure over active expansion joints, parapet corners, and rainwater outlet fillets.
Site Inspection & Contractor Consultation
Our Hyderabad technical team conducts substrate assessments, mock-up test patches, and contractor training on high-volume construction sites.